Simple fix fixings or AXI-FIX fixings are a 2 part system used to fix flat cut or
moulded letters to brick walls, wooden fascias,
metal cladded fascias or plastic fascias.
The stud fixing which is already attached on the back of the letter will have been placed on a paper layout to punch a hole in the paper leaving a registration mark making a fixing template. The fixing template is then positioned where required on the fascia and the fixing points are drilled. The female cups are then screwed to the fascia using 1" posidrive, plated pan head screws. The lettering is then pushed into the cups until an audible click is heard.
(only supplied when requested with an additional charge)
Brass locators are a 2 part system used to fix flat-cut or moulded lettering. The stud fixing which is already attached on the back of the letter will have been placed on a paper layout to punch a hole in the paper leaving a registration mark making a fixing template. The fixing template is then positioned where required on the fascia and the fixing points are drilled. The female cups are then screwed to the fascia using 1" posidrive, plated pan head screws. The lettering is then pushed into the cups and tightened with a spanner.
(only supplied when requested with an additional charge)
Threaded rod is used when fixing moulded lettering to an uneven surface, or where
the lettering may be subject to vandalism. The threaded rod is secured to the rear of the lettering using a 'keyhole' fixture. a fixing template is provided which is offered up to the fascia and drilled with slightly larger diameter holes than the rod.
Silicon is then injected into the holes. The lettering is then pushed into the holes until level.
